Fume hoods-KWTFG004
Product Category: fume hoodProduct Type: KWTFG004
Technical indicators: noise ≤ 55Db;
Working surface wind speed: 0.5 ~ 0.8m / s;
Ventilation capacity: 2000 ~ 2500m3 / h;
Working voltage: AC220V;
Total pressure 30-28pa.
online consulting
product material description
1.1 Table: 18mm thick natural granite made of high-quality, corrosion-resistant, resistant to strong acid and alkali and organic solvent erosion, high temperature, waterproof, anti-bacterial growth.
1.2 Cavity: Fume hood operating surface net space 1200mm × 680mm × 1100mm
1.3 liner and guide plate: the use of imported fume hood special acid-proof guide plate, 6mm thick white surface SOLID PHENOLIC RESIN COMPOSITE LINER laminated chemical board installation. Installation location and angle of exhaust gas distribution to be uniform, no dead ends, in the standard conditions, the baffle above and below the middle and lower air volume ratio of about 50 ± 10%, to ensure that different proportions of the gas can be effectively ruled out , And the other with a manually adjustable air volume ratio design, can improve the middle and lower outlet air volume ratio to 80% or more to meet the needs of different experiments.
1.4 Windows: 6mm thick professional explosion-proof glass, the window with non-stop balance, concealed structural design. Windows counterweight balance, to ensure a smooth window open, close, the window slide up and down freely, you can stay in any position in the fume hood and the fume hood countertop vertical closure, designed to prevent gas spillage air grille, to prevent Due to the temperature difference arising from the convective gas spill to ensure that when the window is still working when the fan is closed, the cabinet will not produce negative pressure in the work area.
1.5 window handle: the use of epoxy powder spray paint steel handle, beautiful, generous.
1.6 Suspension cable: 5mm PVC coated steel cable, with rust-proof, load-bearing ability, resistance to rust, corrosion and other characteristics.
1.7 Fume hood shell, box: the overall use of 1.2mm high-quality cold-rolled steel plate by special machine cutting, stamping, bending, gas shielded welding produced by the surface degreasing, pickling, phosphating and other anti-rust process, The epoxy resin spray process, with strong acid-base resistance, corrosion resistance, impact resistance, toughness and other characteristics. Smooth surface of steel, does not allow significant welding scar, bubbling, depression, indentation, scratches, cracks, pitting, collapse angle and edge defects.
1.8 Fume hood controller: Microcomputer integrated touch panel switch control, beautiful appearance, easy maintenance and replacement.
1.9 socket: the brand multi-purpose three-hole socket, and configure the overload protection switch.
1.10 Lighting: Fluorescent lighting, to ensure that the face is not less than 450Lux brightness standards, not with the cabinet gas contact, easy to replace.
1.11 fan: the use of PP centrifugal fan, exhaust good, low noise, acid and alkali, weathering resistance. The electrical machinery uses the steel electrical machinery.
1.12 Ventilation pipe: 250mmUPVC pipe.
1.13 handle, hinge: Guangdong ABC brand hinges, opening times to reach more than 100,000 times. Handle with the door bending one-piece shape of the dark handle.
1.2 Cavity: Fume hood operating surface net space 1200mm × 680mm × 1100mm
1.3 liner and guide plate: the use of imported fume hood special acid-proof guide plate, 6mm thick white surface SOLID PHENOLIC RESIN COMPOSITE LINER laminated chemical board installation. Installation location and angle of exhaust gas distribution to be uniform, no dead ends, in the standard conditions, the baffle above and below the middle and lower air volume ratio of about 50 ± 10%, to ensure that different proportions of the gas can be effectively ruled out , And the other with a manually adjustable air volume ratio design, can improve the middle and lower outlet air volume ratio to 80% or more to meet the needs of different experiments.
1.4 Windows: 6mm thick professional explosion-proof glass, the window with non-stop balance, concealed structural design. Windows counterweight balance, to ensure a smooth window open, close, the window slide up and down freely, you can stay in any position in the fume hood and the fume hood countertop vertical closure, designed to prevent gas spillage air grille, to prevent Due to the temperature difference arising from the convective gas spill to ensure that when the window is still working when the fan is closed, the cabinet will not produce negative pressure in the work area.
1.5 window handle: the use of epoxy powder spray paint steel handle, beautiful, generous.
1.6 Suspension cable: 5mm PVC coated steel cable, with rust-proof, load-bearing ability, resistance to rust, corrosion and other characteristics.
1.7 Fume hood shell, box: the overall use of 1.2mm high-quality cold-rolled steel plate by special machine cutting, stamping, bending, gas shielded welding produced by the surface degreasing, pickling, phosphating and other anti-rust process, The epoxy resin spray process, with strong acid-base resistance, corrosion resistance, impact resistance, toughness and other characteristics. Smooth surface of steel, does not allow significant welding scar, bubbling, depression, indentation, scratches, cracks, pitting, collapse angle and edge defects.
1.8 Fume hood controller: Microcomputer integrated touch panel switch control, beautiful appearance, easy maintenance and replacement.
1.9 socket: the brand multi-purpose three-hole socket, and configure the overload protection switch.
1.10 Lighting: Fluorescent lighting, to ensure that the face is not less than 450Lux brightness standards, not with the cabinet gas contact, easy to replace.
1.11 fan: the use of PP centrifugal fan, exhaust good, low noise, acid and alkali, weathering resistance. The electrical machinery uses the steel electrical machinery.
1.12 Ventilation pipe: 250mmUPVC pipe.
1.13 handle, hinge: Guangdong ABC brand hinges, opening times to reach more than 100,000 times. Handle with the door bending one-piece shape of the dark handle.
